DARK Stamping Polish №02 white STICKY, 10 ml
€5,70
You may also like
Description
STAMPING POLISH DARK are highly pigmented stamping polishes that transfer easily with the correct application. They feature a wide color palette, are not thick, and work with all types of stamping tools.
How to Use:
-
Complete your manicure, apply a base/gel or colored polish, and cure in a lamp;
-
If there is a tacky layer on the nail, remove it with DARK GEL CLEANSER;
-
Apply the polish to the plate, scrape off the excess with a scraper, and transfer the design to the stamper;
-
Transfer the design from the stamper to the nail using a rolling or a flat, even motion;
-
Cover with a top coat (if the top coat slides off the design, apply a thin layer of a clear base coat first, and then the top coat).
Why Might the Design Not Transfer to the Stamper?
-
The polish should not be too thick. Take an adequate amount of polish on the brush, just enough to cover the design;
-
Apply the polish to the plate with 1-2 movements. The longer you apply it, the higher the chance of a poor transfer because the polish dries in the air;
-
Work with the scraper at an angle of approximately 45 degrees, without pressing too hard, to avoid "squeezing out" the polish from the design;
-
Work with the scraper quickly (2-4 movements are enough), without a wide swing across the entire plate;
-
Then quickly put down the scraper and grab the stamper (remember, there's no time to waste when working with these polishes);
-
Transfer the design to the stamper with a gentle, rolling motion. DO NOT press the stamper hard into the plate-the harder you press, the more polish will remain on the plate.
Volume: 10 ml.
